Question

Which model for PP hollow corrugated sheet production line extruder ?

Accepted Answer

What the model of extruder for PP hollow corrugated sheet making machine?

The Tongsan PP hollow corrugated board production line is able to efficiently extrude and produce grid plates with high smoothness surface , thanks to specially designed screws and advanced control systems.

Tongsan engineer design and improvement the special screw for PP corrugated grid plate ,ensures the good plasticization of the raw materials, which guarantees high output and stable extrusion.

We also design the co-extrusion type that can reduce the cost by use recycled plastics in a high proportion, with the help of a special screw , it is easy to get high quality hollow corrugated sheet through the co-extrusion type.

We equip the production line with a reasonable extruder based on the capacity required for the different widths of PP hollow corruagetd sheet. Our extruders can stablily supply raw material to the molds in it's most efficient state.

It will not be able to achieve the required amount of extrusion because of the small size of the extruder, nor will it cause electrical loss and equipment loss due to excessive extruder.

If the extruder model is too small, the required capacity can not achieved, which affects the quality and production speed of the product.

If the extruder is too large, it will cause electrical cost and machine damage, which will increase the cost of production.

Our extruder model configuration has been proven by engineers' scientific calculations and actual production. This is a reasonable and efficient combination, which is more in line with the production needs.

The model number for PP hollow corrugated sheet making machine extruder。

Model	Sheet Width	Sheet Thickness	Extruder Model	Motor Power
TS-1400	1250mm	2-6, 8-12mm	100/36	55-75kw
TS-1860	1700mm	2-6, 8-12mm	120/6	75-90kw
TS-2300	2150mm	2-6, 8-12mm	120/36	90-110kw
TS-2600	2450mm	2-6, 8-12mm	120/36	90-110kw
TS-1400(co)	1250mm	2-6, 8-12mm	100/36+65/36	75kw+37kw
TS-1860(co)	1700mm	2-6, 8-12mm	120/6+65/36	90kw+37kw
TS-2300(co)	2150mm	2-6, 8-12mm	120/36+80/36	110kw+37kw
TS-2600(co)	2460mm	2-6, 8-12mm	120/36 +80/36	110+37kw

ModelSheet WidthSheet ThicknessExtruder ModelMotor PowerTS-14001250mm2-6, 8-12mm100/3655-75kwTS-18601700mm2-6, 8-12mm120/675-90kwTS-23002150mm2-6, 8-12mm120/3690-110kwTS-26002450mm2-6, 8-12mm120/3690-110kwTS-1400(co)1250mm2-6, 8-12mm100/36+65/3675kw+37kwTS-1860(co)1700mm2-6, 8-12mm120/6+65/3690kw+37kwTS-2300(co)2150mm2-6, 8-12mm120/36+80/36110kw+37kwTS-2600(co)2460mm2-6, 8-12mm120/36 +80/36110+37kw